Learn about SodaStream Fizz & Go Cool metal carbonating bottles

The Fizz & Go Cool metal carbonating bottle is made of –

• The bottle (interior and exterior) is made of food-grade 18/8 stainless steel, matte finish;
• The cap is made of BPA free plastic and the seal and strap are made of semi flex silicone, featuring a leak-proof design.
• The Fizz & Go Cool metal carbonating bottle & cap weighs 460 g / ~1 lbs.

The Fizz & Go Cool metal carbonating bottle is compatible with the following SodaStream Sparkling Water Makers: SodaStream MIX®, SodaStream TERRA® and SodaStream E-TERRA®, SodaStream ART®, SodaStream DUO®, SodaStream E-DUO® and SodaStream ENSO®.

❗ Please Note - The Fizz & Go Cool metal carbonating bottle is NOT compatible with the SodaStream AQUA FIZZ® and SodaStream GAIA® Sparkling Water Makers, neither with any of the machines compatible with the Screw-In Cylinder ❗

• The Fizz & Go Cool metal carbonating bottle has no expiration date.
• The Fizz & Go Cool metal carbonating bottle crafted from 18/8 stainless steel and offers a sustainable and durable alternative to single-use plastic bottles.

The capacity of the Fizz & Go Cool metal carbonating bottle is:

• Total capacity: 900ml / 30fl.oz
• Fill line capacity: 745ml / 25fl.oz - Internal water fill line indication

1. Rinse before use;
2. Add water up to the internal indicated fill line;
3. Carbonate;
4. Add flavor* only after carbonation:
   • Add 7 ¾ teaspoons (~ 1.3fl.oz) of drink mix to the Cool bottle.

WARNING ❗ To prevent personal injury:

• NEVER remove the bottle during carbonation.
• NEVER carbonate an empty carbonating bottle.
• NEVER use if the bottle is damaged or deformed in any way.
• NEVER heat in a microwave or stove or put in a freezer.

Yes! Our double-walled stainless-steel base ensures your drinks stay cold or hot for approximately 12 hours, providing you with refreshing hydration throughout the day.

WARNING ❗ To prevent severe burns:

• DO NOT carbonate water above 45°C / 113° F.
• Be Extra Careful when storing hot liquids in the bottle and when opening a bottle containing hot liquids.

The SodaStream Fizz & Go Cool metal carbonating bottle is dishwasher safe. For best results and to keep your bottle sparkling clean, we recommend adding Dishwasher rinse aid to your dishwasher cycle. It helps to keep your bottle color looking fresh and clear.
When manually washing, use warm soapy water.

WARNING ❗

• NEVER use cleaners with bleach or chlorine, or sharp tools to clean.

1. Make sure your Sparkling Water Maker is compatible with the SodaStream Fizz&Go Cool metal carbonating bottle - SodaStream MIX®, SodaStream TERRA® and SodaStream E-TERRA®, SodaStream ART®, SodaStream DUO®, SodaStream E-DUO® and SodaStream ENSO®.
2. If you already carbonated the water and when trying to remove it the bottle is stuck, follow this guidance:
   • Slightly twist the bottle and it should be released easily.
     Avoid shaking the bottle! It will only lock the Snap-lock mechanism and might damage the machine. If you did, follow these steps:
     1. Push the bottle with the Snap-lock towards the machine (as you would do before carbonating).
     2. Gently pull the Carbonating Bottle towards you until it reaches its fully forward position.
     3. Remove the bottle.